Under the Prusa i3 MK3S box.

prusaprinters

<p>This is a box for storing stuff underneath and between the legs of the Prusa i3 Mk3S. It is a remix of the print by Kare, and has been extended and adjusted so that the larger feet by schuetzi99 (<a href="https://www.prusaprinters.org/prints/1727-anti-vibration-feet-for-prusa-i3-mk3s">https://www.prusaprinters.org/prints/1727-anti-vibration-feet-for-prusa-i3-mk3s</a> ) fit.</p> <p>I have created a lit that fits over the top and clicks into place. So that loose things to not jump up and jam the Prusa's mechanisms. Currently these seem a bit loose to me, but that will depend on the accuracy of your printer. It is leaving a 0.2mm gap along the sides. May be should be 0.1</p> <h3>Print instructions</h3><p>Nothing much special about the printing. The base container has a layer height of 0.3mm for fast printing, since it is mostly hidden anyway and does not really need to look fancy. The slicing did some thing a bit weird with the front vertical piece causing it to be a bit rough, but not affecting the print.</p> <p>The top lids are printed at 0.2 layer height, and the gcode file, does not have a top on it so the inner support structure is visible.</p>