Umbrella Academy
thingiverse
Filament printed with CR-10 using Cura 4.1. Tianse Black PLA filament was used. Dimensions are as follows: (X) - 115mm (Y) - 115mm (Z) - 6.5mm Layer height is set to 0.2mm. Top and bottom layers each consist of four layers. Infill density is 10% grid. Infill before walls is disabled. Extruder temperature is set to 210 degrees Celsius. Bed temperature is set at 60 degrees Celsius. Retraction is enabled with a retraction length of 4.5mm. Print speed is 60mm/s. Infill speed matches the print speed. Travel speed is 80mm/s. Acceleration control is enabled for smoother prints. Build plate adhesion is achieved through a five-line brim. Estimated print time is two hours and 57 minutes. The printed object weighs approximately 29 grams or 9.84 meters.
With this file you will be able to print Umbrella Academy with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Umbrella Academy.