Ultra miniature screw driver

prusaprinters

<h4>Use case</h4><p>This ultra miniature screw driver is meant to be always equipped with one specific screw bit, which you may need for a special application.&nbsp;</p><p>I use mine to tightened the screws that hold my motorbike mirrors in place. On the motorbike there is very little space to store tools, so miniature size and weight matters.</p><h4>Printing</h4><p>I recommend to print this part from PETG, which is way more flexible than PLA. Simply print it in the uploaded orientation. To make it strong enough for the tough press-in procedure, I recommend at least 3 perimeters (better 4) and 25% infill at least.</p><h4>Assembly</h4><p>The bit is really hard to press in, you may need a vice to create the needed force (well, I did). But once the bit is in, there will be no risk whatsoever that you would lose it (at least not separately from the handle).</p><h4>Please like it if you like it</h4><p>Your satisfaction is my reward. Please give me a like if you like it. And a picture of your print would also be nice.</p><p>Happy printing!</p><p>&nbsp;</p>