Ultimate FLSUN Q5 Upgrade Sherpa Mount

thingiverse

4/22/23 Major Update! All parts are easier to print and install. Added a printable alignment tool to mark where to drill (one hole). Improved front cover and minor visual changes. Print the main body face down with supports touching build surface. 3/17/23 Updated the fan cover/probe mount. The probe could become unstable or misaligned. The cover and the main body have been updated but if you have already download replacing the cover should fix the issue. Hey! Your Q5 is kinda sucking isn't it? I mean you can get a print off once in a while but the quality just isn't great and you'd love to print in TPU or even have enough cooling to print overhangs. Well I feel your pain! https://www.youtube.com/shorts/z7uw5OMtwT0 This uses the Sherpa Mini extruder (can be printed) https://github.com/Annex-Engineering/Sherpa_Mini-Extruder Need two 4010 blower fans (24v) Will need a 3010 fan Need one 36mm NEMA 14 Motor 17mm (I use https://www.printedsolid.com/products/ldo-nema-14-motor-ldo-36sth17-1004ahg ) Will need to drill one hole in effector plate Will need to cut the top off your hotend radiator (or buy an extra to cut) Cut Volcano version to 20mm or a bit less (its bolted on the bottom) Cut Standard V6 to 28.5mm or a bit less (its bolted on the bottom) Some hardware M3 and M2 You must use a 17mm stepper for clearance and not the 20mm, you can mount the 20mm but you will lose a portion of the build surface in the rear. The 17mm will allow full build volume. I'll be updating this over the next couple weeks to include instructions and build and any suggestions. https://www.youtube.com/shorts/PcfxDur9LCA