Ultimate Creality CR10 ender 2 3 Double Blower Fan Mount with BLtouch

thingiverse

Going direct drive with the following kit: https://www.amazon.com/gp/product/B085ZRPT15/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 As a result I had to align the Double Blower Fan Mount to the kit. Lots of twicks and adjustments. I have also came up with an idea to fix the back side of the other end, since the mount is held by two screws on one end only... To me worked out great - holds firm. Let me know your oppinion, this is one of my first remakes along with Trianglelab Hotend Fan Duct (link below). If works great, I may design the direct drive braket itself. I liked the idea of 4 wheels and the clean look of the chosen direct drive as oppose to other creations. Although the rails system is in the order as well... I will do the printer pictures once the Mount is installed and tested. Other parts to print: 1. https://www.thingiverse.com/thing:4750218 - Trianglelab CR-10 (Ender 2, 3, etc) Easy Fit 40mm Cooling Duct. This is if you are using ALL METAL hotend like this one: https://www.aliexpress.com/item/32909386487.html?spm=a2g0s.9042311.0.0.6afe4c4dQbM199 2. https://www.thingiverse.com/thing:3869260 - Stock Hotend Cooling Duct designed by therealmakmillion Original projects used: 1. https://www.thingiverse.com/thing:2767047 2. https://www.thingiverse.com/thing:3463166 Parts needed: 2 - 50mmx15mm blowers 2 - M3x20mm socket head bolts (attach the blowers to the bracket/duct) 2 - M3x10mm socket head bolts (attach the bracket to the extruder carrier) 2 - M3 nuts (attach the blowers to the bracket/duct) 1-plastic band for fixing cables. 2 - M3x20mm bolts and nuts for the fans bar My Printing settings: Standing position with supports Material: PETG Temp 235 Bed Temp 80/70 Any comments/tips/donations are welcome.