Ultimate Armattan Rooster Collection (R-XSR, TBS Crossfire nano, AKK X2 Ultimate, RDQ Mach 2, GoPro Session, LED strip, Antenna)

thingiverse

My Armattan setup is designed, printed, tested, redesigned, and extensively tested multiple times. The R-XSR Mount is a remake of another design with modifications to fit the other parts I've created. It's complete, printed with PLA, without support material, at 20% infill. I use the RDQ Mach 2 as my VTX, which is an excellent choice due to its microphone and high-performance capabilities, along with its high output power. The RDQ Mach 2 Mount sits on the R-XSR mount, and the VTX clicks securely into place. It's complete, printed with PLA, without support material, at 20% infill. The Antenna Mount is positioned at the rear of the quad, featuring a hole for the VTX antenna, two RX antennas (90 degree), and a space to accommodate an LED strip (Aurora RC, 25mm x 6 mm). It's complete, printed with PLA, with support only from the base plate, at 20% infill. I printed it on the front side down, ensuring that the attaching holes are strong. Supports were printed only from the base plate using PrusaControl. The LED holder requires a bit of filing to fit the LED strip perfectly. I've also designed a Lens Protector for the Rotor Riot Runcam Swift 2, which is still in its work-in-progress version. Additionally, I've created a Motor Wire Clip that fits onto the inner sections of the arms to secure motor wires. This design is also still in its work-in-progress phase. I'll be uploading photos of completed parts soon. If you have any questions, feel free to ask me in the comments! UPDATE 2018.08.22: I've added a 2306 Hypetrain Motor Softmount. To print this softmount, use flexible filament and set it to 100% infill. UPDATE 2018.08.22: I've also added a GoPro Session 5 flexible holder. Print the GoPro holder using flexible filament at 100% infill, and consider adding diagonal infill if possible (Simplify3D can handle this). UPDATE 2018.09.26: Finally, I've added a modified RX mount that supports both the FrSky R-XSR and the Crossfire nano receiver! I'll be uploading photos of it later. UPDATE 2018.09.26: I've also added an AKK X2 Ultimate VTX mount. The VTX can be fitted with or without heatsink, and it securely holds them in place while providing good ventilation. There are several ducts for wiring through the mount. The VTX requires a 90-degree MMCX antenna pigtail as the stock antenna won't fit well. I'll be uploading photos of this component later. I printed the AKK X2 Ultimate VTX mount using PLA and ABS, at a layer height of 0.2mm, with 20% infill. I placed it on the vertical back side of the mount, minimizing supports (use Simplify3D to customize the supports). There's no need to add supports in the vent holes. UPDATE 2018.09.26: I've also added two versions of an antenna holder for the TBS Immortal T antenna for the Crossfire nano receiver, a VTX antenna, and an LED strip. I'll be uploading photos of this component later. I printed it using PLA and ABS, at a layer height of 0.2mm, with 20% infill. I placed it on the vertical back side of the mount, minimizing supports (use Simplify3D to customize the supports). --------------------- Future plans: I plan to use, test, break, refine, and recreate these designs, ultimately creating the ultimate Armattan Rooster setup. I'm also testing various GoPro Session mounts to achieve a jello-free camera mount. I have an Armattan Chameleon Ti, and I plan to create these components for it as well. --------------------- If you like my designs and use them regularly, consider making a small donation! I promise to update these models to make them even better.