Ultimaker GoPro Wired Mount 90mm and 130mm

cults3d

Description of Revisions: GoPro Fixed bottom plate revised by 7mm to centre the GoPro mount better and to allow easier installation on the 80mm version. Ensure correct orientation before assembly. For a GoPro anti jello mount - multicopter and other equipment, print out one "top" plate. Print out the 8 retaining pads. Print out either the Fixed or Adjustable bottom plate. Non-GoPro owners can print out Two of the Top plates and modify (the GoPro interface is removed). Contour cam owners print out the Contour bottom plate. Cut 4 lengths of multi stranded steel wire to about 80mm long using a Dremel cut. If making this in Flexible PLA, use 70mm long wire instead. Tin the ends with solder to prevent fraying. Gather 16 No M3x12mm button head bolts with nuts and 32 No washers. Assemble as per pictures, using washers on the bolts to protect the PLA and avoid overtightening. The Top plate mounting holes are spaced at 23.5mm and 33.5mm, specific dimensions for my needs hence the odd sizes. I use M3X8mm Lg Hex standoffs to mount it to my frame. You can experiment with wire diameter and lengths to tune your mount to your specific requirements.