Ultimaker 8mm MXL Pulley

thingiverse

Layer s at 0.2 thickness needs to be filled up to 30%. Once completed, you can proceed with a smile :) To accomplish this task, you have these options: place 20 teeth, keep nut shaft distance as 1.2, set retainer height to 2.5, increase tooth width by an additional 0.3, and adjust idler height to 1.5. Additionally, use a pulley B with a diameter of 18, set m3 nut depth at 0.9, m3 nut flats to 5, use only one nut, choose a profile, skip the idler if needed, use a motor shaft with an 8.8 diameter, set nut angle to 90 degrees, opt for a 3.0 diameter m3 nut, increase tooth depth by additional 0.4, set pulley B height at 8, and use two retainers. Lastly, choose a m3 nut hex of 1 and set pulley T height at 8 as well.