Ultimaker 2 temperature torture calibration test

cults3d

If you print this test, please document below what material and g-code you used and what the optimal temperature was. Description: Three distinct G-code files for Ultimaker 2 created with default CURA settings and a temperature range from 220C to 190C in increments of 5C. Printing features: Straight wall Overhang (circular) Overhang (45 degrees) Curved surface Flat surface Hole (for small bridge test) Rounded corner Fast Print (FP): 0H45, 0.15mm layers Normal Print (NP): 2H01, 0.10mm layers High Quality (HQ): 3H21, 0.06mm layers I left the build plate at 60C because the base was warping when the build plate heating was turned off. I also included files where the build plate temperature is set to 0. This approach is obviously more accurate for the test, but if the base of the print comes loose you essentially have nothing. You can try it out yourself. If you want to create the g-code yourself or for a different printer, you'll need to insert the temperature commands at the appropriate layer. The base is 2mm high, with the rest being 10mm per piece. Commands: Set bed temp to 0: M140 S0 Set nozzle temperature: M104 S200 (where 200 is the temperature).