Ultimaker 2 Raspberry Pi and Pi Cam v2 Holders

thingiverse

These are compact and easily printable hangers designed to hold a raspberry pi case and pi-cam v2 securely on an Ultimaker 2, 2+, or Extended. The angle for the Pi Cam holder is fixed, offering a full view of the active printing area and showcasing most of the build volume even on Extended model Ultimakers. The clips are specifically designed to hang a raspberry pi case with a standard screw bracket featuring two prongs that are separated by 40mm. First, print the pi case hanger, then attach the T-struts into the holes using glue, welding, or fusing. The hanger has been extended to support the extra weight of cables necessary for connecting the raspberry pi to power, network, and a printer. A standard 6" ribbon cable that comes with the Pi Cam v2 will work if the raspberry pi is hung on the front of your printer; however, using a 12" or 18" cable is required if it's hung on the back or side. To use the camera clip, you'll need to put at least one flat bend in the ribbon cable, but the clip has a void that accommodates this bend and reduces strain on the cable. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: No Resolution: .1-.2mm for pi case hanger, .05-.1mm for camera clip Infill: ~10% Notes: I find the T-struts come out better with a brim but are annoying to remove afterwards.