Ulincos 16mm Latching/Momentary Push Button Switch for Voron V2.2

thingiverse

This is a rapid mount I designed to accommodate Ulincos (or similar) 16mm latching and momentary switches that fit within the existing hexagonal skirt holes for the Voron Designs V2.2 printer. I connected this switch to be a latching, LED always on push button that controls power to the top mounted LED bars inside my Voron V2.2 enclosure. Prints well with the same default print settings for the Voron V2.2 printed parts (www.vorondesign.com). The design is two pieces which sandwich the Voron bottom skirt piece and support the switch. The first piece mounts on the front of the skirt and has a small 1.2mm recess to allow the button housing to seat within the piece with some extra room for the o-ring to snug things up. The second piece mounts from the rear of the skirt and provides additional support for the switch inside the skirt's hexagonal hole. Only the supplied o-ring and thin profile hex nut required to mount are the ones that come with the Ulincos brand switches. The Ulincos 16mm switches can be found on Amazon here (https://www.amazon.com/Ulincos-Latching-Button-Suitable-Mounting/dp/B07D2CX76S) along with switching options, colors, voltage specs and wiring guides. Ulincos also makes 19mm switches, so this design should be capable of being modified to support those as well.