ULA Bracket DT-6
grabcad
The density of this material is 0.04841 pounds per cubic inch, weighing at 0.063 pounds and with a volume of 1.31 cubic inches. The minimum edge distance surrounding all bolt holes (0.22in) is two times the diameter of the bolt hole away from the center and maintained through the depth. Similarly, for a minimum edge distance of 0.27in, it's still two times the diameter of the bolt hole away from the center and maintained through the depth. The strength calculation was done via Finite Element Analysis, predicting a maximum von Mises stress of 4441 psi under an ultimate load of 600 lbf applied uniformly in the negative Z direction.
With this file you will be able to print ULA Bracket DT-6 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on ULA Bracket DT-6.