ULA Bracket DT-5
grabcad
The ULA Bracket DT-5 is an enhanced version of its predecessor, the ULA Bracket DT-4. Key features include a density of 0.04841 pounds per cubic inch and a mass of 0.0857 pounds, with a volume of 1.7709 cubic inches. The minimum edge distance surrounding all bolt holes (0.22in) is twice the diameter of the bolt hole away from the center and maintained through the depth. Similarly, the minimum edge distance for bolt holes with a diameter of 0.27in is also maintained at twice its diameter. Strength calculations were performed using Finite Element Analysis, resulting in a predicted maximum von Mises stress of 4248 psi under an ultimate load of 600 lbf applied uniformly in the negative Z direction.
With this file you will be able to print ULA Bracket DT-5 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on ULA Bracket DT-5.