Ugrinsky Vertical Axis Wind Turbine Remix

prusaprinters

Thanks to vladua for the great wind turbine. https://www.thingiverse.com/thing:3627007I wanted to have the bearing completely below the wind turbine. To do this, I enlarged the bars at the top and bottom and added 8 mm holes. I added a thin layer to the upper hole for better bridging. Since the wind turbine has a small base, I added supports and adhesive discs. For printing, the wind turbine should be turned in such a way that the first layer of the upper end plate bridges briefly. NabeHalter22 fits a 22mm rod, hub fits a 25mm rod or external 40mm clamps. If necessary, the axis can be fixed with M3 screws and nuts using the adjusting ring. I recommend a test print sunk in Z for the hub. Then measure the inner diameter (22.0 mm) and compensate for the possible deviation with a horizontal hole extension (Cura). Hub holder was printed with PETG and the rest with PLA.An axle 8x310 mm and two ball bearings 608ZZ 8x22x7 mm are required, for the holder 4x cylinder head screws M5x35 with nuts.If you want, you can glue "Savonius3KlLi" together and attach it to the protruding axle.I printed all the wind turbines with PLA. I recommend brighter PLA up to 35°C air temperature. If it is warmer or if darker filament should be used, then use PETG or better ASA.I would also like to recommend these wind turbines:Illusion Windturbine MK2 counter-rotatinghttps://www.printables.com/de/model/895957-illusion-windturbine-mk2Double rotor addon for wind turbine MK2https://www.printables.com/de/model/887565-double-rotor-addon-for-wind-turbine-mk2Double wind turbine MK3 counter rotatinghttps://www.printables.com/de/model/883528-double-wind-turbine-mk3-counter-rotatingWind Turbine MK3 neo Remixhttps://www.printables.com/de/model/882595-wind-turbine-mk3-neo-remixArchimedes Wind Turbine Remixhttps://www.printables.com/de/model/773350-archimedes-wind-turbine-remixMini Airplane Wind Turbinehttps://www.printables.com/de/model/643163-mini-airplane-wind-turbineSavonius Vertical Wind Turbine Remix https://www.printables.com/de/model/775074-savonius-vertical-wind-turbine-remixDarrieus Savonius Turbine Ver.2 Remix https://www.printables.com/de/model/776180-darrieus-savonius-turbine-ver2-remixWindturbine MK2 neo Remixhttps://www.printables.com/de/model/782829-windturbine-mk2-neo-remixIllusion Windturbine 200 / 250https://www.printables.com/de/model/785427-illusion-windturbine-200-250Toroidal Illusion Windturbine https://www.printables.com/de/model/790615-toroidal-illusion-windturbineIllusion Windturbine TIE F. Tail Finhttps://www.printables.com/de/model/796246-illusion-windturbine-tie-f-tail-finWind Turbine 620 mmhttps://www.printables.com/de/model/810511-wind-turbine-620-mmWind turbine savoniov helix – Remixhttps://www.printables.com/de/model/843331-wind-turbine-savoniov-helix-remix