UEFA Champions League Decor Sign (color in same layer)

thingiverse

Hi everyone! I designed a UEFA Champions League design that can be printed on multiple layers with a Decor Sign. These files are optimized for a 30x30 bed, but you can scale them up or down to fit your needs. To get the best results, make sure your bed is well-calibrated. For an extra-glossy finish, I recommend printing these designs on glass. Here's how to do it: First, position the three files exactly as shown: for example, 150mm X and 150mm Y. Write down their locations on a piece of paper so you can refer back to them later. Then, print each file separately. Here are the step-by-step instructions: Step 1: Print the first part of the sign in one layer (recommended thickness: 0.16mm). The Z-axis should be set to -0.4mm. Step 2: Next, print the logo in two layers with a Z-axis setting of -0.2mm. Use a thickness of 0.16mm for the first layer and 0.36mm for the second layer. Step 3: Print the first part of the sign again from layer 0.16 to 0.36mm. Step 4: Finally, print the full "body" design that gives height (just use the top and bottom layers). The Z-axis should start at 0.36mm. You can even pre-print the first part of the sign in two layers and then skip Step 3 altogether! Have fun printing these designs!