Tyco Shock Tower Twin Turbo Taiyo Jet Hopper 4wD Super Turbo Hopper

prusaprinters

<h3>TYCO Shock Mount Repair for Twin Turbo, Jet Hoper, 4WD Super Turbo Hopper, etc.</h3><p>This is a shock mount and repair tab for the Tyco Twin Turbo, and Taiyo Jet Fighter and 4WD Super Turbo Hopper. Maybe others?</p><p>There is a repair tab also included. You will need this if the tab broke off the chassis. You can just glue the tab to the body, but it will not hold. For best results use glue and screws. Two small M2 x 5mm self taping screws work great. You need to remove the body, servo, and wheel. The holes on the repair tab go all the way through. This is so it can be used as a guide to drill the holes in the chassis. Just hold it in place and use small 1.5mm drill bit (I use a small hand drill, not a cordless). There are three holes because depending on which model you have, the holes need to be different spacing to avoid the body mounts. You'll see what I mean once you hold the repair tab up to the chasses. Also see the attached pictures.</p><p>Rotate it 90° on it's side to print, and use supports touching build plate.</p><p><strong>Want More Free Designs? Like and Comment! If you enjoy this design, please leave a like and/or a comment. It keeps me motivated to make more, when I know people are using my designs.</strong></p><h3>Print Settings</h3><p><strong>Printer:</strong></p><p>Kingroon KP3S 3.0</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:</strong></p><p>Yes</p><p><strong>Resolution:</strong></p><p>0.2</p><p><strong>Infill:</strong></p><p>60%</p><p><strong>Filament:</strong></p><p>3D Solutech PLA</p><p>Black</p><p><br>&nbsp;</p><p><strong>Notes:</strong></p><p>&nbsp;</p><p>Flip 90° on it's side to print. Use supports touching build plate.</p><p>&nbsp;</p><p>&nbsp;</p><p>Category: R/C Vehicles</p>