TwoTrees Sapphire Pro Drag Chain Mounts Take Two

prusaprinters

<p>This is a small change to the original posted by G4Cab. I removed the Chain STL's, they are just not worth it. I lengthened the Cable Management for the 10x20 Chain setup and combined the cable management for the 7X7. You can purchase a 7x7 and 10x20 chain on <a href="https://www.amazon.com?linkCode=ll2&amp;tag=thingiverse09-20&amp;linkId=e4759bff1fa9a55a0f897d801ce2d765&amp;language=en_US&amp;ref_=as_li_ss_tl">Amazon</a> for less that 25 bucks. I used these</p> <p>7x7 Chain https://www.amazon.com/dp/B01M1EC6MO?psc=1&amp;ref=ppx_yo2_dt_b_product_details</p> <p>10x10 Chain ( Doesn't lay completely flat, needs coaxing) https://www.amazon.com/dp/B07WK15X25?ref=ppx_yo2_dt_b_product_details&amp;th=1</p> <p>I would run the printhead and both of the profiles at 50% infill and 20% on everything else.</p> <p>I have also positioned the prints how I printed them. I would suggest full supports on everything but the 7x7 Hotbed which I have labeled no supports.</p> <p>I also highly suggest printing the 10x20 Printhead in PETG. There are 2 different variants, one with BL and one without.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Twotrees Sapphire Pro</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>Yes</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>.20</p></div> <p><strong>Infill:</strong></p> <p>20-50%</p> <p><strong>Filament:</strong></p> Any PLA and PETG <p>Any</p> </p></p> Category: 3D Printer Parts