Twotrees Sapphire Plus/Pro - X-Axis Carriage CR10 Microswiss 2040 Radial Fans, 4020 Hotend Fan Edit (Optional BL-Touch, Direct Drive)

thingiverse

I Just quickly editet the Parts to use the Amazon prime available Noctua 4020 Version of the Fan. =) https://www.amazon.de/gp/product/B071J8CZP9/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Update 1: Ok, this complete design can't work at all, so I edited quite all Parts now: - reworked all holes to be able to use M3 threaded inserts. (4.1mm holes now) https://www.amazon.de/gp/product/B0B51MFXZQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 - Also the Tensioner wasn't able to work as the designer wished, so i corrected that issue. (also 4.1mm holes to be able to use m3 inserts) - The Blower covers for the parts cooler also didn't work for me. So I resized the insert area to fit the common 4020/24v blowers from amazon. https://www.amazon.de/gp/product/B08X43YBMX/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&th=1 - The height of the BL touch mount didn't work for me also. Mine was too high when building als designed. So I added new holes at lower height, as option for anyone having same issues. Those holes are also 4.1mm diameter for threaded inserts. - forget the BL touch update above, an exernal BL won't work since there's just no room in the back. The BL mount stopped the extruder case before reaching endstop, because collision with the rods of Z axis. Lon story short, i integrated the BL touch into the extruder between fan and hotend. Since there were no step files i had to use tinkercad, sorry if contoures aren't as clean as in the original design. But should be functional though =) / 21.09.2022 - Corrected some errors / 25.09.2022 - What a crappy original Design. The creator can't have tested this, since there are too many functional errors in design. I corrected them all.