Two Rooms and a Boom - Rugged Box for PnP

prusaprinters

Two Rooms and a Boom - Rugged Box for Print 'n Play storage Here's my attempt at a very thematically appropriate box to store all of your Two Room and a Boom PnP cards. I used 110 weight stock paper and Ultra Pro Gaming Sleeves (82712). You can find the PDFs on Tuesday Knight Games website - (link to zip file). I only have the base game included here and some were left out since I ran out of sleeves but they would fit otherwise.Note: I've included the 3mf file for the lid so you can make adjustments but it's otherwise unchanged from @Whity's version. Printing InstructionsI'd follow the original Rugged Box or just go with 20% infill, seems unlikely you need supports for the screw holes.You may want some support below the lettering in BOOM, I used a 0.2 Support Z-Distance, enabled Support Interface, with Grid Pattern. Extra partsYou'll need 6x M3x30 just like the original Rugged Box although I found a couple machine screws to do the job on the main hinge. For the latches I actually found a printed screw worked just as well (remixed .stl included, suggest you do 0.1 mm layer size - try scaling it down to 97-98% if things are too tight). How much can it hold?Should hold the original 120 cards, sleeved, printed on 110 weight stock paper. Note: mine also have a 2nd strip of stock paper in the sleeve that has references for each card to help beginners, which is doubling overall thickness - you could probably fit quite a bit more.2 Leader cards - also 110 weight stock paper, folded in half. Included in the zip link above.I also have the folded up Playset references shoved in (see picture).