Two-part Drumstick Holder (4 drumsticks)

thingiverse

A two-part drumstick holder for vertical 1.5" drum rack tubing is designed to securely hold up to four drumsticks. The inner diameter of the holder cup and ring is 2", allowing it to accommodate multiple sticks. For larger sets, a version capable of holding six to eight drumsticks is available. The holder clamps onto the tubing using M6x30 mm bolts (four in total), which have a length of 35 mm or can fit snugly into place with an additional 10 mm of clearance. Two versions exist, differing in bolt hole diameter - one for M6 brass threaded inserts and another with 5 mm holes that can be tapped directly to accept M6 screws. In cases where a custom dimension is required, the 5-mm-hole variant can be printed with increased perimeters or solid infill using local modifiers during slicing. This allows users to drill out the desired specification after printing. The clamping bracket remains the same for both variants of the ring and cup, as well as the "insert" and "tap" versions. Designed to print vertically without supports, this drumstick holder requires careful attention to scale when printing multiple parts. It is recommended to first print one mounting bracket, test fit it onto your rack tube, and then adjust the scale for the rest of the components if necessary.