Twin loc-line arm mount for camera tripod socket

prusaprinters

<p>This mount allows you to attach 2x Loc-Line arms to the bottom of your camera using its tripod socket.</p><p>Print settings:</p><ul><li>Layer height: Not critical, I used 0.2mm</li><li>Filament: Anything, I used PLA</li><li>Infill: 20% grid</li><li>Perimeters: 3</li></ul><p>Parts required:</p><ul><li>1/4-20 1" long screw for tripod socket</li><li>1/2" Loc-Line Fixed Mount x 2 (part number 51895)</li><li>1/2" Loc-Line segments as required to get the length of arms you want</li></ul><p>Plus, for the 180-degree version:</p><ul><li>1/4-20 1 3/4" long screw for joining Loc-Line cups x1</li><li>1/4-20 hex nut x 1</li></ul><p>Or for the 90-degree version:</p><ul><li>1/4-20 1" long screw x2</li><li>1/4-20 hex nut x 2</li></ul><p>The 90-degree version is better at keeping away from the bottom of the camera's hand grip (so avoids blocking your hand's grip).</p><p>If you liked this design you'll probably like my other macro-photography focused designs, please check them out:</p><p><a href="https://www.printables.com/social/25723-thenickdude/models">https://www.printables.com/social/25723-thenickdude/models</a></p><h3>Print Settings</h3><p><strong>Rafts/Supports: </strong>No</p><p><strong>Resolution: </strong>0.2mm</p><p><strong>Infill: </strong>20%</p><p><strong>Filament:</strong> PLA, e.g. Prusament PLA Mystic Brown</p>