Twilight Struggle Insert - Ready To Play - Sleeved

thingiverse

Hi everyone ! It's my first time posting a game insert I designed, so bear with me. I couldn't find a Twilight Struggle insert, so I created one myself. My goal is to design all inserts I make to be both ready-to-play and sleeved cards friendly. To print this insert, you'll need to print four boxes: Print these boxes with the open part facing up (I'm not sure why, but Fusion 360 exports my files in a bad position). You'll also need to print four tops: Print these tops with the larger part facing down. These parts fit inside a 210x210x205 build volume. I set mine to 211x211x205 in Cura and Octoprint to avoid disabling the avoid part distance setting each time, but it should fit if properly configured (the parts are exactly 210mm wide; I couldn't reduce them due to sleeved card width). Because this insert is designed for a perfect fit, you may struggle to get the top inside the holder rail if your printer's accuracy isn't good enough. If you've already printed the top, you can sand it and the rail until they work together. Alternatively, you can print the top parts at 97-99% fill density. I hope you like this insert! Don't hesitate to post your creations! P.S. Here are the sleeves I used (these are affiliate links): - [Amazon.com](https://amzn.to/2qqUcH4) - [Amazon.de](https://amzn.to/34WVtVq) - [Amazon.com](https://amzn.to/2sSADs7) Consider leaving a tip or using my affiliate links. The money earned will be used to buy PLA for future insert prototypes I'll design.