TwentyFour-7 2" Quad Turbowing camera mount

thingiverse

I didn't care for the original design so I came up with something new :) It's totally adjustable now! *Keep in mind that this is optimized for 20mm standoffs instead of the standard 15mm, allowing for tilting - also, I used a 4in1 stack since I had no 15mm standoffs on hand :)* You can adjust the height right in the openscad file if you want to! I've attached the openscad file so you can mess around with it (super easy to adjust for other cameras too). **Warning:** I didn't do a great job cleaning this up and I ended up hacking in one or two things (marked hack). Also, the distance adjustment isn't super precise - I made the screw mounts for the cam piece 0.3mm wider on each side (cam_mount_x=2.5; where it was cam_mount_x=2.2; for the standoffs). Some of the variable names aren't the best in hindsight, but use it or leave it - I might optimize this to make a good customizer item in the future. The tolerance on the cam opening is super tight! **You'll need 2xM2 screws!** Turbowing Camera: https://www.banggood.com/Turbowing-TWC25-14-CMOS-700TVL-120-1_0lux-NTSC-Wide-Angle-Mini-Camera-for-DIY-Micro-FPV-Racer-p-1179739.html?rmmds=search&cur_warehouse=CN&p=AJ100878057492016129 Lastly, I took inspiration from this thing but designed it completely from scratch: https://www.thingiverse.com/thing:2530332