Tweaker clone camera mount

thingiverse

Camera mount for Banggood Tweaker Clone "Multirotor 180" and camera Eachine 148° CCD perfectly fits the camera with a precise angle of 30°. Print Settings: Printer: Geeetech Prusa i3 X is used. Rafts: Not required, as it doesn't matter. Supports: Yes, to ensure stability. Resolution: Set at 0.22 for optimal quality. Infill: 75% infill density provides the perfect balance between weight and strength. Notes: To achieve a successful print, rotate the standoffs flat with the bed, ensuring they support the camera holder securely. Applying blue painter's tape to the bed, along with a small amount of glue stick, is recommended. However, it may require experimentation with different temperatures to achieve optimal adhesion. Filament: PLA is used for this print job. Slicer: Cura software is utilized for slicing the 3D model. Print temp: The ideal temperature is set at 210 degrees Celsius. Shell thickness: 0.6mm provides sufficient strength and durability. Bottom/top thickness: 0.3mm is used to ensure a smooth finish on both sides. Bed temp: The bed temperature is maintained at 45 degrees Celsius. Print settings are adjusted midway through the print, changing the temperature to 200 degrees Celsius and flow rate to 115% for optimal results.