TWANG LED Game (BricoGeek remix)

thingiverse

This is my remix of the TWANG LED Game I made for the OSHW Demo 2019. You will need: ### Bill of Materials 1 x [Arduino MEGA2560](https://tienda.bricogeek.com/arduino/306-arduino-mega-2560.html) 1 x [5V/3A Power supply](https://tienda.bricogeek.com/fuentes-de-alimentacion/1214-fuente-de-alimentacion-conmutada-5v3a.html) 1 x [BNO085 IMU](https://tienda.bricogeek.com/medicion-inercial-imu/802-sensor-inercial-absoluto-9-dof-bno055.html) 1 x [1 meter SK6812 LED strip with 144 LEDs per meter](https://tienda.bricogeek.com/led-neopixel/1175-tira-de-led-rgb-1m-144-led-sk6812.html) 1 x [IEC320 power conector with fuse](https://tienda.bricogeek.com/varios/1215-enchufe-iec320-c14-con-fusible.html) 1 x [Power cable](https://tienda.bricogeek.com/cables/773-cable-de-alimentacion-pc-18m.html) 10 x [Brass inserts](https://tienda.bricogeek.com/tornillos-y-tuercas/669-inserto-para-plastico-m3x4mm-20-unidades.html) You will need a few M3/10mm screw for the handle. For attaching the power conector, Arduino board and power supply, some M3/5mm screw will be enough. The base box is a press fit assembly. To screw the board and power supply, I used 3mm brass inserts. ### Source code Yes, the BNO085 is a bit overkill but that's what I have on hand at the time. Just add some wiring, upload the code and you're done. I used a different LED strip from the original design and adjusted FASTLed library settings. The code is mainly the same but the getInput function corrected to work with the BNO085. ### 3D Printing I used PET-G for the case and top handle but you can print with PLA. For the body of the handle, you will need flexible filament like the [X-920 from Sakata3D](https://tienda.bricogeek.com/filamento-3d/1324-filamento-flexible-x-920-natural-500g-175mm.html) which is semiflexible. If you use a filament that is too flexible, it may result in difficult gameplay. ###If you like my Work, you can buy me a beer: [](https://www.paypal.me/oscargonzalezvarela)