Turtle Collapsing Staff
prusaprinters
<p>This collapsing staff was inspired by a turtle, this is a challenging print in the beginning so watch and make sure all rings attach around 4.2-4.4mm in height</p><p>All collapsing staff are roughly 44 inches or about 112 cm long fully extended but that is highly dependent on tolerances of your printer and the model.</p><p> </p><p>Print Settings</p><p>Layer height and infill at your discretion, I use 0.3mm layer height and 7% infill</p><p>Make sure your line width in cura is set to 0.5mm and extrusion width is set to 0.5mm in prusa slicer for perimeters </p><p>Supports are should not be needed but if used make sure none are in the model above the rings.</p><p><br> </p>
With this file you will be able to print Turtle Collapsing Staff with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Turtle Collapsing Staff.