Turbowing Cyclops Camera Mount

thingiverse

This is a mount for the Turbowing Cyclops v2 camera, designed specifically to fit the Gemini 2.5 frame with 26mm spacing or the MIB 2.5 frame with 19mm spacing. The holes are spaced at either 26mm or 19mm to line up perfectly with the front standoffs on each frame. This mount consists of two parts: a top and bottom section that screw together using m2x10mm screws. Simply choose the bottom piece that matches your frame, as the top is universal. The Turbowing Cyclops v2 camera can be installed with a modified lens (m7 1.8mm 180 degrees) inside this mount. However, the stock lens (120 degree) is longer and will not fit well within this mount. To reduce vibration, I recommend using a zip tie to tension the camera rearward, as seen in the attached photo. UPDATE: On July 23rd, 2018, significant modifications were made to improve the design. The top piece now includes a retaining strap for the SD card. This strap wraps around the back of the camera and is secured to the other side using a small screw. Additionally, a guard was added that fits on the side of the Cyclops camera in front of the SD card. This guard should be glued into place and serves as a high point to prevent the SD card from ejecting during a crash.