Turbo Racing 1/76 Track - Wall Corners

thingiverse

Hi guys, Build yourself a track for your Turbo Racing 1/76 cars with these corner walls. You can use them with the sloped bottoms in or out. I had in mind to build a high bank corner but I'm probably not going to go through with it. You can see the size in my Turbo Racing 1/76 review: https://www.youtube.com/watch?v=2mJr66j9AYE "Armco" style walls here: https://www.thingiverse.com/thing:4890272 The "Inner" files are inside corners. The first number is the radius in millimeters. The second number is the sweep angle (most are 45 degrees). The straight pieces can be scaled on the long axis to make any length you want. You can use glue to connect the pieces and/or a piece of paperclip or wire in the holes with glue. I bent the paperclip piece into a kind of "w" shape so that there is some friction and it works ok. I used just hot glue on a couple of section and that works fine too. My thinking on these was a more permanent layout, so you can reuse the pieces fairly easily but they are not made to just click together. My experience with trying to get fancy click joints for 3D printing is that they tend to break too easily so I didn't bother with these. As always, use at your own risk.