TTB-MRLP - Model Rocket Launch Pad

myminifactory

A sturdy 3D printed model rocket launch pad that's built to last! With an adjustable leg for leveling and aiming your rocket into the wind, it's designed for use with standard 1/8" or 3/16" (Maxi) sized rods, perfect for fun with rockets of all sizes. The main leg needs two prints, while only one print is required for the other pieces to complete the launch pad. Very little hardware is needed to finish this launch pad.* Required hardware includes: A) One 1/8" x 24" rod B) (Optional) One 3/16" x 48" rod C) One 1/4" Keyless Chuck D) Two 1/4-20 x 1" bolts (hex or allen cap) E) One 1/4" ID nylon washer F) One 1/4-20 nylon insert lock-nut G) One 3mm x 0.5mm x 20mm bolt (hex or allen cap) H) One 1/2" OD toothed lock-washer (min. 3mm ID) I) One 1/2" OD fender washer (min. 3mm ID) J) One 3mm x 0.5mm wing-nut K) One large tin can lid (coffee cans size ideal) L) (Optional) Three 1/4-20 x 3 1/2" bolts (hex or allen cap) M) (Optional) Three 1/4-20 nylon insert lock-nuts N) (Optional) Three 1/4" ID split-lock washers O) (Optional) Three 1/4" ID flat washers **Note:** Optional hardware for bolting the launch pad together, otherwise it snaps together and may be glued for permanent installation.