TT02 D 9g servo adapter

thingiverse

Fitting a 9g Mini Servo to a Tamiya TT-02 Chassis Requires Careful Planning and Execution. To begin, ensure that the servo is compatible with your vehicle's transmission type. The TT-02 has a universal joint on the front axle, which can accept servos of various sizes. However, it is crucial to verify that the servo you choose will not restrict movement or create binding issues. Next, decide where you want to mount the servo. You can install it on the chassis plate near the transmission or directly above it. Choose a location that allows for optimal servo movement and minimizes interference with other components. Mounting the Servo: 1. Drill holes in the chosen mounting area for the servo screws. 2. Attach the servo to the chassis using screws provided with the servo or use M3x10mm screws if your servo doesn't come with them. 3. Make sure the servo is securely fastened and won't move during operation. Connecting the Servo: 1. Connect the servo power wires to the receiver's battery leads, taking care not to cross any other critical connections. 2. Route the servo control wire to a suitable location for connection to your ESC or radio transmitter. Testing the System: 1. Double-check all connections and ensure that everything is properly secured. 2. Power up the system and test the servo movement to confirm it's functioning correctly. By following these steps, you'll be able to successfully install a 9g mini servo in your Tamiya TT-02 chassis.