True-FLEX Featherboard with accessories (1/4-20 fasteners)

prusaprinters

<p>Inspired from <a href="https://www.youtube.com/watch?v=QHkh-4iYq1U">Kreg True-FLEX™ Featherboards</a></p> <p>There are two versions, « TF_Featherboard_Easy_to_print.stl » is easier to print but need a little more material (~15%).</p> <p>« TF_Featherboard.stl » need less material, but is a little harder to print (warping, stringing,...) and longer. Use it if your printer is well adjusted. Use 100% infill for this one. Support are optionals, but helps for the hoverang sections.</p> <p><strong>New (25/02/2019) :</strong> Added 2 shorter versions, inspired by one of the remix</p> <p>You can print many featherboard and stack them, just use two « TF_Spacer.stl » between each. You can stack 2, 3, 4... or more featherboards, usefull for resawing big parts on a bandsaw for example.</p> <p>For T-Track/T-Slot you can use a 1/4-20 hex bolt, the lenght depend of how many featherboard you stack.</p> <p>For miter gauge track, I provide an 'adapter' that works with 1/4-20 hex bolts too</p> <p>Also, I designed a knob for a 1/4-20 nut.</p> <p>Print with tought material (abs, petg,...), remember it is a safety part !</p> <h3>Print instructions</h3><p>Category: Parts</p>