Tronxy X5SA upgrades bowden and direct drive

thingiverse

I've designed or modified all the parts needed to upgrade my Tronxy X5SA. Here are the files I used: First, I created a direct drive x carriage that requires the modified x_z_sensor_direct. All the files are oriented for 3D printing, and only the bullseye duct and new direct drive x carriage need supports. I utilized these mega gantry plates (credit to Graham01): x5s_y_l_plate_r1_x1 x5s_y_r_plate_r1_X1 You can find them on Thingiverse at https://www.thingiverse.com/thing:2594291. Additionally, I used the bullseye duct and modified the base (credit to dpetsel): BULLSEYE_DUCT_9.27_X1 BULLSEYE_BASE_X5SA_X1 You can find these files on Thingiverse at https://www.thingiverse.com/thing:2759439. Finally, I stabilized the carriage (credit to rothnic): STABILIZED_CARRIAGE_X1 This file is also available on Thingiverse at https://www.thingiverse.com/thing:2780420. The rest of the files I designed some will be made in aluminum for added strength in the future: BMG_EXTRUDER_RUNOUT_SENESOR_LEFT_X1 FRONT_LEFT_PULLEY_HOLDER_X1 FRONT_RIGHT_PULLEY_HOLDER_X1 FRONT_PULLEY_TENSIONER_X1 X_ENDSTOP_Z_ABL_MOUNT_X1 X_MOTOR_MOUNT_X1 Y_MOTOR_MOUNT_X1 Y_ENDSTOP_MOUNT_X1 XY_ENDSTOP_COVER_X2 6X10MM_BELT_CLIP_X4 I printed the parts in PLA at 100% infill and 4 walls. The following non-3D printed parts are required: bmg (clone) https://www.amazon.co.uk/gp/product/B0827QM9SF GT2 20T 5B Toothless idler (2 needed) https://www.amazon.co.uk/gp/product/B07H5J56BN Gt2 20T 5B Toothed idler (8 needed) https://www.amazon.co.uk/gp/product/B07H5J56BN The following hardware is required: 18 M5X10MM buttonhead 18 M5 T-slot nuts 3 M5X35MM buttonhead 8 M5X30MM buttonhead 2 M5X50MM buttonhead 13 M5 nylock nuts lots of M5 washers (some needed to be turned down for pulley bearings) for carriage: a mixture of M3 button heads (my printer came with extras) If you have any questions, feel free to ask and I'll do my best to help.