Tronxy X5S Z axis guide rod mount

thingiverse

Simple clamp style z guide rod holder. All that's needed to disassemble is the screws into the guide rods and the top bearing mount. This straightforward guide rod mount allows for perfectly parallel z rods near the frame while keeping them rigid without causing any binding. Stock holes cannot maintain parallel or rigid z rods due to short stock guide rods, which bend the frame down if tightened. The guide rods are fully tightened to the bottom extrusion with a 7mm gap on top. The z axis clamp mount extends 15mm above the extrusion for larger gaps. To complete both sides: * 8x M3x20 screws * 8x M3 lock nuts (optional) * 8x M3 washers Additional parts required: 4x M4x25 screws 4x M4 T-nuts 4x M5x20 screws 4x M5 T-nuts M4 and M5 can be used interchangeably. M5 is a better fit but may require drilling for the stock guide bearing. Using washers on outer mounts is ideal, especially with M4.