Tronxy X5 Pi Mount (Customizable)

prusaprinters

<p>This is just another 2020 extrusion mount for the Raspberry Pi 2 and 3.</p> <p>It is just a simple design made using FreeCAD to fit my Tronxy X5 printer enhancements. There are probably other and better solutions for this, but this works for me.</p> <p>The Raspberry Pi can be mounted face up or face down using M2 screws and nuts. If you don´t have that kind of screws at hand (like me) simply use two or three cable ties to fixate the board.</p> <p>When mounted on top there is no way to use a micro USB cable to power the board. This is intentional as it would face inwards and I use an ATX power supply anyway, so the pi gets powered using the GPIO pin array.</p> <p>This mount got designed for the Raspberry Pi 3, but the version 2 should fit as well. The first Pi has an SD slot, which may not fit when mounted on top due to the stabilizer, but I do not recommend using a Pi1 with Octo-Print, anyway. Uploading gcode files takes ages and booting and using the camera is quite slow.</p> <p>As always the FreeCAD source file is included, so you can easily any change you want.</p> <p>Happy Printing</p> <h3> Print Settings</h3> <p><strong>Printer:</strong></p> <p>Tronxy X5</p> <p><p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div><strong>Supports:</strong></p> <p>No</p> <p><p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2</p></div><strong>Infill:</strong></p> <p>15%</p> <p><strong>Filament:</strong> Janbex PLA Black</p> </p></p> Category: 3D Printer Parts