Tronxy X3 simple bed stablizers
thingiverse
I assembled the set in PETG at 60% infill. You will need to drill a hole in the acrylic plate. Bill of Materials: 2 x -8mm x 400 mm guide rods 4 x -LM8U bearings 2 x -M6 bolts and 10mm nuts (Length not specified, but make sure it doesn't touch the guide rod) I did not use any bolts for the bearings and guide rods because they fit snugly. However, these are included in the design (M6 bolts for the bearings, M4 for the rods). The bed does not need to be removed for installation; two holes are drilled centered on the sides of the plate. For a quick tip, use calipers to make straight lines! Make sure that during installation, the bearings run straight and are lubricated with grease or oil.
With this file you will be able to print Tronxy X3 simple bed stablizers with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Tronxy X3 simple bed stablizers.