Triple Track Golf Ball Marker

thingiverse

Made 3 different Triple Track golf ball markers. These must be printed with a multi material printer. I printed all of these on the Prusa MK3+ with MMU2s. Combine the Marker, Left, Right and Center (Stopper too for Trident) and print together using Multi-Material. Print all the triple track markers upside down, and use 0.15mm as the ends of the triple track gets a little too thick if you do 0.25mm. I used PETG so it's a bit more heat resistant. TriplePlain file set - Is the plain ball marker with the triple track. Combine all the parts and print upside down. TridentTripleTrack file set - Is a design based around the Trident ball markers, but with the triple track marker on it. For printing, combine the parts: Trident Marker, Left, Right, Center and Stopper. Flip upside down, and use support when printing the triple marker, so the little stopper is printed well. The base needs to be printed with support so the channel cutout is clean. When printing the Plug, print upside down. Glue the Plug into the base once you put the marker into the base, to keep the marker on top from coming out. I printed the triple track marker on it's own, then printed the base and plug together. I sanded the channel cutout a little so the marker swivels more smoothly. It doesn't have a lot of weight, so smoother swiveling, the better. SpiritMarker file set - Is the triple track on one side, and a hole for a circle spirit level. For printing, combine the parts, and print upside down. You need to take the spirit level, and sand the bottom down so the thickness is as close to 6mm as possible. I think I got it to ~6.15mm, and the level does stick out just a hair. I did this because I wanted to keep the marker as thin as possible. Then glue in the spirit level into the base. Here is the spirit level from amazon: https://www.amazon.com/gp/product/B07RKK22BF/