Trinus filament guide

thingiverse

Filament Guide for the Kodama Trinus Printer This document outlines the filament guidelines specifically designed for use with the Kodama Trinus 3D printer. The following information is crucial to ensure optimal performance and prevent any potential issues that may arise during printing. Recommended Filaments: ------------------------ The Kodama Trinus printer supports a wide range of filaments, including PLA, ABS, PETG, TPU, and more. However, not all filaments are created equal, and some may produce better results than others. Printer-Specific Filament Requirements: ----------------------------------------- * Temperature: The recommended temperature for printing with the Kodama Trinus is between 190°C to 220°C. * Layer Thickness: The optimal layer thickness for the Kodama Trinus is 0.2mm. * Print Speed: A print speed of 50-60 mm/s is recommended. Filament Compatibility Chart: ----------------------------- | Filament Type | Recommended Temperature Range | | --- | --- | | PLA | 190°C - 210°C | | ABS | 220°C - 240°C | | PETG | 230°C - 250°C | | TPU | 200°C - 220°C | Filament Loading: ----------------- To load the filament, first ensure that the printer is turned off. Next, locate the filament loading mechanism and remove any existing filament from the spool holder. Place the new filament in the spool holder, making sure it is securely fastened. Then, insert the filament into the extruder hotend, ensuring it is properly seated. Filament Unloading: ------------------- To unload the filament, first ensure that the printer is turned off. Next, locate the filament loading mechanism and remove any existing filament from the spool holder. Carefully pull the filament out of the extruder hotend, taking care not to tangle or kink the filament. Troubleshooting: ----------------- If you encounter any issues during printing, refer to the following troubleshooting guide: * Temperature Issues: Check that the temperature is within the recommended range. * Layer Thickness Issues: Adjust the layer thickness according to the recommended settings. * Print Speed Issues: Adjust the print speed according to the recommended settings. By following these filament guidelines, you can ensure optimal performance and prevent any potential issues with your Kodama Trinus 3D printer.