TriGorilla Mosfet Case Base For 2020 Extrusion
thingiverse
UPDATE 14-06-2017: I use the Trigorilla on my HyperCube to power my heated bed with a separate 24V PSU. My original remix attaches easily between my two PSUs, but I wasn't satisfied with its horizontal position on my build. I remixed it again to enable mounting the Mosfet vertically between my PSUs. This remix makes it easier to mount on 2020 extrusion. A single layer was also added at the top of the nut traps to allow this to be printed without supports. Print Settings Printer: HyperCube CoreXY Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 30% Post-Printing You will need to run a 3mm drill through the TriGorilla Mosfet mounting holes to remove the thin layer at the top of the nut traps.
With this file you will be able to print TriGorilla Mosfet Case Base For 2020 Extrusion with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on TriGorilla Mosfet Case Base For 2020 Extrusion.