Triforce X Axis wheel for Anet or similar printer (Nema 17 5mm Shaft)

prusaprinters

<p>This is an X wheel for an Anet A8 or similar printer. It fits on the 5mm shaft of the Nema 17 motor that drives the X axis.</p> <p>Back story...</p> <p>I gave a printer kit I got off Ebay to a neighbor kid, who is friends with my youngest son.. He was very excited and built it to the best of his abilities..</p> <p>I examined the printer and found a few flaws in the build and a few design failures in the printer (this was a $50 kit made of really cheap plywood and an almost exact clone of an Anet A8 except for the frame material) It had a poorly designed bed carrier that would hit the Y motor before hitting the end stop and the frame was very wobbly, so I printed some stiffeners and designed various other parts to allow it to work.</p> <p>I knew the kid is a Zelda fan so I designed and printed this Triforce X axis wheel decoration for it..</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Anycubic</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Photon</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.07</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>100</p></div> <p><strong>Filament:</strong> anycubic Resin White</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>I printed this on an Anycubic Photon Zero.. but this would also print well on any FDM printer as well....</p> Just know that this is a very small print so small layer heights would be advantageous... <h3>How I Designed This</h3> <p>I used Designspark Mechanical to design this.. only took a few minutes to design and because of the resin printer it printed really fast too....</p> </div></p></p></p> Category: 3D Printer Accessories