Triangular ice cube tray

myminifactory

An awesome two-part mold for a silicone ice cube tray.   What you need This two-part mold Food safe silicone Optional: Silicon mold separating paste (vaseline)   Instructions Print the two-part mold. The top part is printed upside down so it does not need support. Put the top part firmly into the main mold (the form is tight for a firm closure, in case the walls have warped a little during printing, adjust them slightly with sandpaper. If the mold fits too lose, clamp it down on your table) Optionally rub the inner sides of the mold with vaseline (otherwise it takes a lot of force to separate the mold) Mix about 150 grams of silicone Take the mixing bowl and tap it lightly on the table a few times to get rid of the air bubbles Slowly pour the silicone into the mold until the spikes of the main mold are not visible anymore and the mold is almost full. Wait as long as the instructions for the silicone prescribe and the mold has hardened Remove the bottom part first and the pull it out of the top part Further processing according to the instructions of the silicone Have fun! If you need further information feel free to ask me for help!   Don’t forget to post your makes!