TRex 4.75mm Instructions

grabcad

To Assemble the T-Rex 4.75mm: 1. Begin by carefully unpacking the contents of the box, making sure not to damage any of the components. 2. Locate the main body of the printer and remove it from its packaging. Be careful not to touch any of the internal electronics with your bare hands. 3. Next, attach the arms and legs to the main body using the provided screws. Make sure they are securely fastened before moving on to the next step. 4. Now, connect the power cord to a nearby outlet and turn on the printer. The LED lights should begin to flash as it boots up. 5. Insert the microSD card containing the printer's firmware into the slot located on the top of the main body. 6. Place the print bed onto the main body and make sure it is securely locked in place. 7. Open a web browser on your computer and navigate to the printer's IP address, which can be found on the underside of the main body. 8. Click on the "Settings" tab and select the language and time zone that match your location. 9. Next, click on the "Printer Settings" tab and select the correct settings for your print material and desired resolution. 10. Finally, click on the "Connect to Wi-Fi" button and follow the prompts to connect the printer to your wireless network. The T-Rex 4.75mm is now ready to use.