Traxxas Xmaxx GoPro Camera Mount

prusaprinters

<p>This is a mount made to protect your gopro by placing it inside the Traxxas Xmaxx. You do have to cut the windshield out of a body, but after that the mount is extremely adjustable. It can be moved forwards, backwards, and the camera can be moved up and down. The included files are for Version 2 which addresses some minor issues I discovered while using it. See the notes section for more information about the screws you'll need.</p> <p>To see version 1 of the mount installed and in action watch the videos below:<br/> Mount and First Test: <a href="https://youtu.be/FwdquCv055U">https://youtu.be/FwdquCv055U</a><br/> Bashing in Mud with Mount and protector: <a href="https://youtu.be/07Z2RzMfOb8">https://youtu.be/07Z2RzMfOb8</a></p> <h3>Print instructions</h3><p>If the camera mount moves on you, consider placing a piece of rubber behind it between the printed mount and the Gopro mount and possibly using locktite</p> <p>The holes in the very front of the protective tray can be used to provide extra support by running a zip tie around the outside of the tray and the roll cage under the hood.</p> <p>See the Gopro mount in the included pictures to know which one it was designed for.</p> <p>What you Need:<br/> A single bolt with 20mm long threads for the gopro mount<br/> 7 - hex nuts for m3 screws<br/> 4 - m3x16 screws to secure the mount to the frame<br/> 3 - m3x12 screws to secure the protective tray to the mount</p> <p>NOTE: You can get away with using 1 screw for the protective tray as long as you use a zip tie for the front.</p>