Traxxas TQi Link Smartphone Holder V2

thingiverse

I redesigned "Traxxas TQi Link Smartphone Holder" from scratch (See [Here](https://www.thingiverse.com/make:487439)). This time, I split the lower portion into two and used 3mm brass inserts. The holes for the screws was a little tight on the part labeled "Mount" so I used a 3mm drill to clean them out. Also, the 1/4 20 TPI Bolt thread is a little tight if your 3D printer isn't quite calibrated. Mine was short on Y and Y but it worked OK, just tight. Hardware I used: [3mm brass inserts](https://www.ebay.com/itm/292174784905?chn=ps&mkevt=1&mkcid=28) [2 35mm long M3 screw to attach](https://www.homedepot.com/p/Crown-Bolt-M3-0-5-x-35-mm-Phillips-Pan-Head-Machine-Screws-2-Pack-12218/203540084) [M5 60mm bolt](https://www.homedepot.com/p/Crown-Bolt-M5-32-x-60-mm-External-Hex-Hex-Head-Cap-Screw-02928/203537503) [M5 Nut](https://www.homedepot.com/p/Everbilt-M5-0-8-Zinc-Plated-Tension-Lock-Nut-810218/204274154) [1/4 20 TPI Bolt](https://www.homedepot.com/p/Everbilt-1-4-in-20-tpi-x-4-in-Zinc-Plated-Hex-Bolt-800656/204633305) I've attached STL and 3MF files for printing as well as the f3d and STEP files.