Traxxas Summit front lightbar

prusaprinters

<p>This is a lightbar for the Traxxas Summit. it is a direct bolt on to replace the stock 2 led lightbar on the front bumper. Designed it to be able to fit 6 pc of led to the bumper, so you can have a nice light bridge.</p> <p>With a regular design(6V BEC), 2s3p config of the leds can work perfectly from the receiver or can be soldered to the stock lighting system. or you can make your own wiring as you like :D</p> <p>Installation is easy, but you have to use a longer screw to attach.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Prusa Mk2</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>100%</p></div> <p><strong>Notes:</strong></p> <p>I printed it from pla, but since the pla is rigid, i suggest abs as material, because the part is located in the front of the car, it can get direct hits. keep this in mint while printing.</p> <p>I designed it to be printed it on its back, this way no support is needed.</p> <p>Also, you can change the resolution as you like.</p> </p></p></p> Category: R/C Vehicles