traxxas htd3 5mm 28t

thingiverse

I'm happy to report that the machine is up and running with precision-tuned options for customized fabrication. Customizer technology, available at http://www.thingiverse.com/apps/customizer/run?thing_id=16627, made this possible. Below are instructions for assembling the machine using these specified parameters: Using the following carefully selected options: Nut Shaft Distance: Set to 1.2 mm M3 Diameter: Specified at 3.2 mm Additional Tooth Width: Expanded by 0.2 mm Profile Number: 9 Nut Angle: Fixed at a precise 90 degrees Additional Tooth Depth: Negligible, zero mm depth Options for hex and bolt engagement: M3 Nut Hex: Engraved with precision, set to one engagement Motor shaft size: Defined as 5.2 mm Retainer height: Carefully set at 1.5 mm Pulley diameter (back): Determined at a size of 20 mm Idler specifications: Idler parameter value: Yes Pully thrust distance: Specified in 8 mm height Additional retainer height: Carefully set to 1.5 mm. Additional details for precision fabrication: M3 nut depth parameter: Detailed at a value of 2.7 mm Teething parameter, specified as 28 Pulley and shaft specifications: Pulley top thickness (or Pully t height): Defined with precision as 5mm Pully bore diameter (b): Determined in 20 mm