Traxxas Blue Eagle LS / LSII / SRT Rear Bulkhead

thingiverse

Rear bulkhead for a variety of vintage Traxxas stadium trucks (Blue Eagle LS, Blue Eagle LSII, SRT). This will not work with the Rustler/Stampede/Slash electric vehicles. This may work with the Nitro versions, but I have not confirmed. This bulkhead is different than the Nitro versions in terms of link placement and options. It is also different than the buggy versions (both thickness and positions), as it is intended to work with a thicker rear shock tower (at least based on the chassis/component measurements). Tap the turnbuckle and chassis mounting holes with a M3 tap. Tap the chassis mounting hole with a M4 tap. UPDATE 08/08/20: Modified the rear overlap the transmission. I may still tweak this a little bit but I carried over something similar to the TRX-1/TRX-3 and that was of course wrong (thank you Traxxas for changing something so minor between models) on the original design. It will fit better; and should only require light filing if it does not. UPDATE 08/09/20: Increased lower M4 hole size for improved screw clearance/tapping (depending on tap, etc.). Ideally, it would probably be a little smaller for thread size/engagement, but layer heights/dimensions make that a little more challenging for some printers (part was designed with 0.2 mm layer height in mind with the main face facing the print bead).