Travel Ukulele

prusaprinters

<p>An attempt to create a travel ukulele<br>I tried to make it as simple as possible using glue and only 1 screw.</p><p>The tuners I bought on Aliexpress link below:<br><a href="https://pt.aliexpress.com/item/1005001570809164.html">https://pt.aliexpress.com/item/1005001570809164.html</a></p><p>The screw I used was an M5x80mm with a nut to hold the pulleys.</p><p>My printer is 225x225mm and I was able to print on the edge of the bed. So I believe that any printer of that size will also be able to print.</p><p><strong>Important!</strong><br>Due to the high tension of the strings it is important to print the neck and body with a high infill and at least 6 walls (if you can put 8), otherwise the pressure will warp the ukulele</p><p>In the region of the tuners I recommend doing a 100% filling using a modifier in the slicer, I attached an image of PrusaSlicer as an example.</p><p>&nbsp;</p><p>Share my creations is the way I found to contribute and thank the help I've always had from the 3D printing community.</p><p>I'll try to keep the posts consistent, but if you'd like to help me out with a tip, please use the link below. Thanks!</p><p><a href="https://ko-fi.com/luvem">Buy me a coffee!</a></p><p><a href="https://www.instagram.com/luvem_design/">My Instagram</a></p>