trapézoïdale anti-backlash discoeasy 200
thingiverse
The Discoeasy 200 from Dagoma has a system of pour tiges trapézoïdales with an anti-backlash mechanism. Advantage of the anti-backlash system: It prevents the supports from descending when the printer is at rest... To install them, prepare: 2x trapezoidal T8-2-8D vis 300mm 2x trapezoidal T8 Anti-Backlash 2mm / 8mm screw 8x M3 15mm screw For mounting anti-backlash, some tips are in order: 1) Place the spring in the support printed orifice 2) Position and screw the upper nut to the support (M3x15 or M3x16 because the pre-drilled holes in the support are 15mm) 3) Position the lower nut and secure it by pressing it against the upper nut 4) Screw the trapezoidal rod from below, keeping pressure on the lower nut until the rod reaches the thread of the upper nut (the spring pushing both nuts) Follow Bricador's tutorial for general installation: http://evolution3d-by-bricador.fr/montage-trapezoidale-discoeasy200 You will also find, if needed, STEP files of the supports in addition to STL files.
With this file you will be able to print trapézoïdale anti-backlash discoeasy 200 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on trapézoïdale anti-backlash discoeasy 200.