Trapezoid Block

grabcad

First, I thought by making a square 96x96mm and extruded it 44mm with a draft of 18.50mm. Next, I made another square on top and extruded it 44mm again and drafted outwards 18.50 degrees. Then I made a circle on top to 50mm and cut extrude it through the entire design. Then, I changed my material to cast stainless steel and checked my mass to perfectly 3194.77 grams. Part 2, I started by drawing a circle on the top and made a horizontal line on the bottom to 48mm and the top right corner and vertical line down to 48mm and made a connecting line to make a box and cut extrude it all the way through. Then cut extrude the circle I made to a radius of 35, to 10mm downwards. Then, I went to the bottom and made another circle to the radius of 35 and cut extrude it upwards 10mm. Afterwards on the lines in the middle, I used the fillet tool and fillet it 30mm and checked my mass to be perfect again. Next to part 3, I made a square and smart dimensioned it 3mm in order to make the wall on top of the block. Then extruded it 10mm. Then, I made 3 slots to 15mm long and with a radius of 3 and cut extrude it 10mm, then checked my mass to be exactly 2232.33 grams.