train bridge

cults3d

Human: Train Bridge This bridge is a model that requires additional support. This track is compatible with the standard train track. There are two types of track files. The smaller file is designed for climbing and descending, while the larger one is specifically for the bridge section. The track fits into the bridge section, holding it in place. The support parts determine the height of the bridge, allowing you to choose how tall you want to build it. Keep in mind that you will need to print two copies of each part. To create a flexible connection with the existing rail, you can print the flex connection. This part is also necessary at the top of the bridge, connecting the climb and rail on the bridge. On each support pillar, you must install the "bridge support rails connector train track." The pillars are positioned under the rail connection, resulting in a 5-degree incline. If you want to achieve a 7-degree incline, you will need to print four copies of part 7. Two parts should be printed for the latest climb and two for the bridge support. On the last two parts, apply the "bridge support rails connector bridge train track by Ctrl Design.STL." You can choose how high you want your bridge to be and apply the rule that the highest number of supports must be printed four times. If you decide to build a longer bridge, you will need to print multiple large support numbers as well as the "bridge support rails connector bridge train track by Ctrl Design.STL." The bridge part prints best without additional support. Enjoy printing.